Skip to main content

AKS-managed Azure AD : How to integrate your AKS cluster with Azure AD

AKS is evolving at a dizzying pace and there have been quite  a number of changes since I wrote about AKS namespace isolation and AAD integration . The major update is in terms of creating and Azure AD integrated AKS cluster. You no longer need to create and manage the server and client application, it is handled by the AKS resource provider. 

There are few limitations with this approach though before you get started
  - You cannot disable the AKS-managed Azure AD integration once it is enabled
  - Process is supported only for RBAC enabled clusters
  - Azure AD tenant once integrated cannot be switched to a different one

Lets start with creating an Azure AD group. You can also use an existing one if you want to. Note that creating an Azure AD group would need Global administrator rights

I am executing these steps from Azure cloud shell, where all the required tools like Azure CLI and Kubectl are preinstalled

1. Create the Azure AD group for your cluster administrators. Note down the object id of the group as it is required during cluster provisioning
~$ az ad group create --display-name AKSdemoadminGroup --mail-nickname AKSdemoadmingroup

Note: Once the AD group is created, add the users who will have cluster admin rights to this group



2. Note down the tenant id of your Azure AD. You can get this from Azure portal-> Azure active directory->overview->Tenant information. 


3. Create resource group for the AKS cluster
$ az group create --name demoaksgroup --location  EastUS


4. Create AKS cluster , the object id of the AD group that we created in step 1 and the AD tenant id that was copied in step 2 will be used here
az aks create -g demoaksgroup -n demoaks1  --enable-aad --aad-admin-group-object-ids <AD group obejct ID> --aad-tenant-id <Azure AD tenant ID> --generate-ssh-keys


5. Login to cluster using an user account that is part of cluster admin AD group that was used for the integration. When prompted, login using the Azure AD credentials . 
az aks get-credentials --resource-group demoaksgroup --name demoaks1


In the above example I am executing the "kubectl get nodes" and "kubectl get namespaces" commands after authenticating 

Now you can go ahead and follow the steps in my earlier blog  to setup RBAC for  namespaces using Azure AD credentials




Labels:

Comments

  1. CyanousJuly 28, 2021 at 4:21 AM

    Great work….Nice information ….well explained. Keep sharing this type of valuable information. Looking for the best cloud computing services in Hyderabad contact Cyanous software solutions now.

    Best cloud computing services in Hyderabad
    Best software & web development company in Hyderabad

    ReplyDelete

Post a Comment

Popular posts from this blog

Windows server 2012: where is my start button??

If you have been using Windows Server OS for a while, the one thing that will strike you most when you login to a Windows server 2012 is that there is no start button!!.. What??..How am I going to manage it?? Microsoft feels that you really dont need a start button, since you can do almost everything from your server  manager or even remotely from your desktop. After all the initial configurations are done, you could also do away with the GUI and go back to server core option.(In server 2012, there is an option to add and remove GUI). So does that mean, you need to learn to live without a start button. Actually no, the start button is very much there .Lets start looking for it. Option 1: There is "charms" bar on the side of your deskop, where you will find a "start" option. You can use the "Windows +C" shortcut to pop out the charms bar Option 2: There is a hidden "start area"in  the bottom left corner of your desktop
3 comments
Read more

Install nested KVM in VMware ESXi 5.1

In this blog, I will explain the steps required to run a nested KVM hypervisor on  Vmware ESXi. The installation of KVM is done on Ubuntu 13.10(64 bit). Note: It is assumed that you have already installed your Ubuntu 13.10 VM in ESXi, and hence we will not look into the Ubuntu installation part. 1) Upgrade VM Hardware version to 9. In my ESXi server, the default VM hardware version was 8. So I had to shutdown my VM and upgrade the Hardware version to 9 to get the KVM hypervisor working. You can right click the VM and select the Upgrade hardware option to do this. 2)In the ESXi host In /etc/vmware edit the 'config' file and add the following setting vhv.enable = "TRUE" 3)Edit the VM settings and go to VM settings > Options  > CPU/MMU Virtualization . Select the Intel EPT option 4) Go to Options->CPUID mask> Advanced-> Level 1, add the following CPU mask level ECX  ---- ---- ---- ---- ---- ---- --H- ---- 5) Open the vmx
5 comments
Read more

Virtual fibre channel in Hyper V

Virtual fibre channel option in Hyper V allows the connection to pass through from physical  fibre channel HBA to virtual fibre channel HBA, and still have the flexibilities like live migration. Pre-requisites: VM should be running Windows Server 2008, 2008 R2 or Windows Server 2012 Supported physical HBA with N_Port Virtualization(NPIV) enabled in the HBA. This can be enabled using any management utility provided by the SAN manufacturer. If you need to enable live migration, each host should be having two physical HBAs and each HBA should have two World Wide Names(WWN). WWN is used to established connectivity to FC storage.When you perform migration, the second node can use the second WWN to connect to the storage and then the first node can release its connection. Thereby the storage connectivity is maintained during live migration Configuring virtual fibre channel is a two step process Step 1: Create a Virtual SAN in the Hyper-V host First you need to click on Virtual
2 comments
Read more